Date: Mar 11, 2015

This is a follow-up to “What do I do when a customer rejects a shipment?” from November 4, 2014.

Rejections at destination are inevitable, and the issues surrounding them are never pleasant. So you need to be prepared to take the emotion out of the situation, have your product moved in a timely manner and have it sold for the account of whom it may concern to maximize the return and protect your rights for a future claim.

On a rather routine basis, some shippers incorrectly assume taking control of the rejected load for the purpose of moving the product means they have given up their claim rights, against either the customer or the transportation company. The most important things to remember on a rejected load are to move quickly and minimize any losses. By promptly placing the load with a receiver, you can mitigate damages by salvaging the rejected load while all affected parties determine liability at a later date.

Keep Everyone Involved in the Loop

Remember, you must notify all parties of your actions. It is imperative that all parties are kept fully informed during the process, so as to eliminate confusion regarding the disposition of the shipment.

If the customer rejects a load without the benefit of the USDA inspection, place your customer on notice that:

  • you are not accepting the rejection,
  • you are moving the load to be sold for the account of whom it may concern and
  • if the load meets contract specifications you will be looking to your customer for any and all losses incurred from the original FOB or delivered contract.
What to Do Next

Unless you are working with a trusted carrier, I strongly recommend that rather than rejecting the shipment to the carrier, you arrange for placement. (As the shipper, you probably have better contacts with receivers.) Further, instruct the receiver to return any proceeds, along with proper documentation, directly to you in order to determine your actual loss.

In this situation, be sure the carrier is fully informed of your actions once the rejected load has been placed with the receiver. With the carrier fully informed, taking such action does not invalidate responsibility from either the carrier or the original customer.

Document and Communicate

I cannot over emphasize the importance of documenting your actions as they occur, emailing or faxing both the carrier and customer until liability can be determined regarding your intentions and that the load is being sold for the account of whom it may concern.

Also, get the shipment inspected in a timely manner to document any damage and secure all available documentation, including a temperature recording tape and/or a download from the transportation carrier refrigeration unit.

All this information will be vital in determining liability and adjudicating your claim whether it’s against the initial buyer/receiver or the carrier. Even if you don’t want to pursue a claim against your customer, when carrier liability is in question following these steps ensures you have the proper documentation supporting your potential transportation claim.

So when you do have that inevitable situation of a rejection,

  • immediately address the situation
  • act professionally
  • minimize the loss by moving the load
  • place all parties on notice
  • make sure you receive the net proceeds and
  • prepare a timely claim with all the documentation to finalize it.

If you have a question concerning this blog, please contact me at TommyO@wga.com or call me directly at 949-885-2269.

WG Staff Contact

Produce Price Index

Think farmers are making most of the money from your grocery bill? Think again. Use the Produce Price Index (PPI) to find out the difference between how much you spend on fruits and vegetables and how much actually goes back to the farmer.

Subscribe to Produce Insights

Subscribe to Produce Insights

Fill out the following form to get updates to the Produce Insights blog.